莲花河二桥设计毕业设计;连续钢构设计实例租.docVIP

桥梁工程毕业设计缩写本（1） 莲花河二桥设计 摘要? 本设计根据毕业设计任务书要求及莲花河桥的地形资料，依据现行公路桥梁设计规范在比较了预应力混凝土连续梁桥、预应力混凝土连续刚构桥各自的力学特点之 后，选择预应力混凝土连续刚构桥作为设计方案，对莲花河二桥的主桥和引桥进行了初步设计。该桥主桥跨径组合为67m+122m+67m，两边引桥采用 30m标准跨径的预应力混凝土简支T梁桥。本设计对主桥进行汽车活载作用下的内力计算与控制截面的抗弯配筋计算；对引桥即简支梁桥进行内力、配筋计算，强 度验算、使用阶段裂缝宽度验算和变形验算；最后对主桥和引桥的基础进行单桩承载力计算与桩身强度验算。 关键词? 预应力，连续刚构，简支T梁，桩基础 Abstract:?????? In this design, based on the design task paper ,the topographic data and the present highway bridge design specifications,after has compared the pre-tress concrete continuous bridge and the pre-tress concrete HYPERLINK /dict_result.aspx?r=1t=continuous+rigid+-+framesearchword=%e8%bf%9e%e7%bb%ad%e5%88%9a%e6%9e%84 continuous rigid - frame bridge HYPERLINK /dict_result.aspx?r=1t=mechanical+propertiessearchword=%e5%8a%9b%e5%ad%a6%e7%89%b9%e6%80%a7 mechanical properties，choose the pre-tress concrete HYPERLINK /dict_result.aspx?r=1t=continuous+rigid+-+framesearchword=%e8%bf%9e%e7%bb%ad%e5%88%9a%e6%9e%84 continuous rigid - frame bridge as design proposal,carried on a preliminary design of the main bridge and the approach bridge of Lianhuahe Bridge. The main bridge of Lianhuahe Bridge adopted the pre-tress concrete continuous rigid-frame bridge with three spans of 67+122+67m, while the approach bridge adopt pre-tress concrete simple span T-beam bridge with a span of 30m. In regard to the main bridge, the internal force and the disposition of pre-tress steel are studied in brief. In the meantime, as to the approach bridge, the pre-tress concrete simple span T-beam bridge, strength intensity, stress and deflection of the service stage are calculated. Futhermore, the capacity and the strength of the sill are analyzed. Keywords: ?Prestress；Continuous PC rigid-frame bridge；Simple span PC T-beam bridge；Pile basement 1. 前 言 本论文针对莲花河二桥进行初步设计，其中主桥采用预应力混凝土连续刚构桥，引桥采用预应力混凝土简支T梁。本设计的目的就是通过对预应力混凝土 简支T梁和预应力混凝土连续刚构桥的设计，全面系统将桥梁分析理论、力学计算、结构设计等课程的知识综合起来运用。本毕业设计的意义在于，培养树立正确的 设计思想和方法，增强独立运用理论知识，以及技术标准、设计规范，参考资料，分析问题和解决问题的能力，能用通顺的文字和准确的图表系统完整地表达设计成 果。 根据《莲花河二桥桥址位置