LH1400掘进机维护.04.lubrication.docVIP

SECTION 4 第四章 LUBRICATION 润滑 SECTION 4 第四章 LUBRICATION 润滑 List of Contents 目录 Sub. Sect. List of Contents目录列表 1 List of Illustrations插图列表 2 4.1 General data总体数据 3 4.2 Description描述 3 4.3 Servicing维修 4 4.4 Safety安全措施 5 4.4 Hydraulic tank液压油箱 15 4.4.1 Hydraulic tank replenishment 液压油箱补给 16 APPENDIX 附录 30 List of Illustrations 插图列表 Fig. Figure 1 - LUBRICANT BUCKET 7 图1-润滑剂桶 Figure 2 - INDIVIDUAL LUBRICATION POINTS 8 图2-单独润滑点 Figure 3 - INDIVIDUAL LUBRICATION POINTS 10 图3-单独润滑点 Figure 4 - CENTRALISED LUBRICATION POINTS 12 图4-集中润滑点 Figure 5 – CENTRALISED LUBRICATION POINTS LINE DIAGRAM 13 图5-集中润滑部位线路图 Figure 6 - HYDRAULIC TANK 14 图6-液压油箱 Figure 7 - FILLING HYDRAULIC TANK 18 图7-液压油箱注油 Figure 8 – TRACK DRIVE GEARBOX LUBRICATION 19 图8-履带驱动变速箱润滑 Figure 9 - BOOM LUBRICATION POINTS 20 图9-切割臂润滑点 Figure 10 - TYPICAL ELECTRIC MOTOR LUBRICATION POINTS 21 图10-典型电机润滑点 Figure 11 - TRACK IDLER GREASE POINTS 21 图11-履带惰轮润滑点 Figure 12 - SCRAPER CONVEYOR LUBRICATION POINTS 22 图12-刮板运输机润滑点 Figure 13 - LOCATION OF HYDRAULIC FILTERS 23 图13-液压过滤器位置 Figure 14 - RAISED PRESSURE WATER PUMP 24 图14-升压水泵 Figure 15 - HYDRAULIC ARCH SETTING DEVICE 25 图15-液压拱形梁安装装置 Figure 16 - TABLE OF LUBRICANTS 29 图16-润滑剂表 LUBRICATION 润滑 General data 总体数据 Type of lubricant Refer to Fig. 16 润滑剂型号 参照图16 Capacities:- 容量：- Cutting head 2 speed gearbox . 16 litres 切割臂（双速）变速箱 16升 Cutting head epicyclic gearbox . 13.6 litres 切割臂（行星）变速箱 13.6升 Water pump crankcase. 2.4 litres 水泵曲柄轴箱 2.4升 Type of lubricant 10W30 Oil 润滑油类型 10W30油 Description 描述 Lubrication of the machine consists of regular greasing of bearings and replenishment of gearbox oils. The bearings are lubricated either through individual points, where nipples are fitted directly to the item to be lubricated, or through centralised points where items are connected by pipelines and hoses to conveniently placed banks of nipples or single point manifolds. 设备的润滑包括轴承的定期润滑和变速箱的定期补油。轴承的润滑既可以通过与润滑部件直接相连的单独润滑点，也可以通过集中润滑点，润滑部件通过管道和软管连接到集中润滑点，便于布置集中的油嘴或多个单独润