《SAEJ49-1980 液压铲车技术参数的定义》.pdfVIP

SURFACE REV. VEHICLE J49 APR80 STANDARD Issued 1973-01 400 Commonwealth Drive, Warrendale, PA 15096-0001 Revised 1980-04 Superseding SAE J49 JAN73 Submitted for recognition as an American National Standard SPECIFICATION DEFINITIONS—HYDRAULIC BACKHOES 1. Scope 1.1 This standard includes the definitions of specification most commonly used to describe nonfull-rotating hydraulic backhoes. 1.2 Dimensional and operational specifications are to be determined without assembly or equipment changes such as buckets, dippersticks, etc. When specifications are affected by adjustable or extandable members, the position must be specified. 4.2.1–6.2 are further defined by Figures 1–8. Figures 1–8 are not intended to be descriptive of any existing machine and are used only to clarify the meaning of the standard. 1.3 Purpose—The purpose of the standard is to establish a uniform method of providing dimensional and operational specifications for hydraulic backhoes. 2. References 2.1 Applicable Publications—The following publications form a part of the specification to the extent specified herein. Unless otherwise indicated the late