运动控制卡的设计学学位论文.doc

摘要本设计了一种将控制应用于系统，该系统以为核心。 设计中采用MAX IIEPM570T144作为控制器，以Verilog HDL作为设计语言，用Quartus仿真软件分别对分频模块、调频模块和滞后模块进行了仿真。 关键字：PLD，FPGA，Quartus ABSTRACT In recent years, with the development of computer technology, microelectronic technology and NC technology, open CNC system has become an important development direction. As part of the open CNC systems important component, motion control card research and development has been given more and more importance. From the point of development trend, based on the CAN bus, CPLD and FPGA as the core processor of the open motion controller is becoming the mainstre