压电薄膜实验室放大器.PDFVIP

Piezo Film Lab Amplifier Charge or Voltage Mode Operation BNC Input and Output 0.01 to 1000 mV/pC Sensitivity Range in Charge Mode 1M to 1G Input Resistance, -40 to 40dB Gain in Voltage Mode Multi-Pole, Low-Pass and High-Pass Filtering with -3dB Frequencies Ranging from 0.1Hz to 100kHz Internal Battery (2 x 9V) or external 24VDC Power Supply Operation The Piezo Film Lab Amplifier is a versatile preamplifier for use with Piezoelectric sensors. The electric signal from the piezo film is generated within the electrodes of a capacitor. It is important to arrange an input that controls the rate of charge leakage appropriately for the application. Simply connecting a piezo film element to the input of an oscilloscope will usually create a high-pass filter that removes any low frequency content of the original piezo signal, and this can lead to disappointment or incorrect evaluation of the materials true potential. This has led MEAS to develop a new low-cost Piezo Film Lab Amp, specifically aimed at developers and engineers exploring the material. Both first-time users and seasoned professionals will benefit from the wide range of sensitivity adjustment in either voltage or charge modes, and the functionality of the high- and low-pass filters. FEATURES APPLICATIONS • Wide Dynamic Range • Low Frequency Dynamic Strain • Charge and Voltage Modes • Pyroelectric Signals • Response to 0.1Hz • Audio-band and Acoustic Signals • Active HP and LP Filters • Machine Vibration • Piezo Cable and Traffic Sensor Interface