《4-地质勘查有关技术文件目录.》.pdfVIP

1 2 3 4 Working Area Design of Drill Hole 1. Hole No 2. Hole Location Collar Coordinates : X (N): ; (E) : ; H: m 3. Goal of the drill hole To verify ore bodies 4. Designed depth m ; Open azimuth 0 . Open dip ; 5. Open diameter HQ 89mm; NQ: 75mm Geological technical requirements Down-hole survey should be conducted every 50 m, and end of hole; the allowed error of dip angle is ºand allowed error of azimuth is2 /100m. 50 100 2º 100 2 Core recoveries: the overall recovery of whole hole should not be less than 90%, the recovery of ore bodies and 3.5 m within the hanging wall and footwall should not be less than 95%. The continuous length of rock core with less than 85% recovery and of ore bodies with less than 95% should not be greater than 5 m and 3 m, respectively. : Depth verification: depth verification should be conducted very 100 m, and when entering ore bodies, important index layers, structure layers, and end of hole by using depth verification tools. The allowed maximum error is 1/1000. Once the error is beyond the limit, it has to be eliminated. : 100 1/1000 Designer Date Working Area Notice of Drilling Operation