ni-w-zr2复合镀层工艺及性能研究.pdfVIP

关键词：LY12 铝合金；Ni-W-ZrO 复合镀层；稀土 Y(NO ) ；梯度；非晶态；显微硬度； 2 3 3 耐蚀性；耐磨性 研究类型：基础应用研究 Subject： Preparation and Properties of Ni-W-ZrO2 composite coatings Specialty： Materials Processing Engineering Name ： Pei Feng (Signature Instructor： Sun Wan-chang (Signature ABSTRACT Amorphous composite coatings, wit excellent general physical and chemical characteristics due to its special structure, have aroused great attention in recent years. Wit the development of modern industry, Functional Gradient Material has become one of the new materials. The consistency of FGM’s internal structure and component can enhance the bonding strengt between coating and substrate, therefore improve the corrosion resistance and wear resistance. In the process of composite electrodeposition, Rare eart can improve the properties of plating bath, purify the interface, enhance the quality of the coating due to its favorable physical, chemical, electrical, magnetic and optical properties. Re has been successfully applied in electrodeposition, hot dip galvanizing, conversion coating and chemical heat treatment and surface treatment. In this paper, crystalline, amorphous and gradient Ni-W-ZrO2 composite coatings were prepared by electrodeposition, based on LY12 duralumin alloy substrate. In the condition of optimal concentration of ZrO2 particles and the Rear eart being fixed, by means of scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction(XRD), microhardness, corrosion tests, the friction and wear test and oxidation weighing, the microstructure, component, hardn