《《SolidWorks 三维设计及应用教程》电子教案》.pptVIP

* Plotting Results To plot the above results directly in SolidWorks, right click on the 零件 or constraint to be measured and select the measurements desired. To delete plots or change the plot properties, right click in the plot area. Exporting Results From the Motion menu, select Export Results, then select To Spreadsheet. Then, pre-define the graphs you would like to see. Pick the element or elements you want results of (using Shift or Ctrl for multiple selections followed by a right click), then select the Characteristic to graph (i.e. force, torque, velocity, etc), and finally the Component(s) (you can use Shift, CTRL, or draw a selection window around the components). The Add Curve button number automatically adjusts depending on the number of entities selected for the current graph. To start a new plot, you need to click on the New Plot button prior to adding the curves. You can click on any existing curve or plot, and use the delete key to remove it, or modify the plot title. OK assumes you have finished defining plots and will then export the information to Excel. ~END OF FOURBAR EXERCISE~ * The user interface is split into 3 main components; the IntelliMotion browser, the motion pulldown menu, and the motion toolbar. IntelliMotion Browser This is the graphical interface with the motion model. It allows you to drag and drop 零件s, right click to modify entities and use standard windows functions for selection and deletion. It provides rapid access for information on motion entities and their related 零件s, joints, forces. All commands except the export options can be accessed from the IntelliMotion browser. Motion Menu This is the classic pull down; options structured in a logical sequence such that you work from the top down. All commands are accessible by the pull down menu. Motion Toolbar This is a floating toolbar that allows the user to review the motion of the model and modify general configuration options as well as animation replay options. The