《smali文件语法参考》.docVIP

smali文件语法参考 Dalvik opcodes 表中的VX值表示的Dalvik寄存器。根据不同的指令，16，256或64K寄存器可以访问。对long和double值的操作使用两个寄存器，例如在V0的注册解决占地V0和V1的寄存器双重价值。 布尔值存储真正的为1和0为假。被翻译成整数运算的布尔操作。 HIG-endian格式中所有的例子，如0F00 0A00 0F，00，0A，00顺序编码。 注意有没有解释/在一些指令的例子。这意味着，我没有看到指令“在野外”，它的存在/名称只能从已知 的Android操作码常数列表。 Opcode (hex) Opcode name Explanation Example 00 nop No operation 0000 - nop 01 move vx,vy Moves the content of vy into vx. Both registers must be in the first 256 register range. 0110 - move v0, v1Moves v1 into v0. 02 move/from16 vx,vy Moves the content of vy into vx. vy may be in the 64k register range while vx is one of the first 256 registers. 0200 1900 - move/from16 v0, v25Moves v25 into v0. 03 move/16 04 move-wide 05 move-wide/from16 vx,vy Moves a long/double value from vy to vx. vy may be in the 64k register range while wx is one of the first 256 registers. 0516 0000 - move-wide/from16 v22, v0Moves v0 into v22. 06 move-wide/16 07 move-object vx,vy Moves the object reference from vy to vx. 0781 - move-object v1, v8Moves the object reference in v8 to v1. 08 move-object/from16 vx,vy Moves the object reference from vy to vx, vy can address 64k registers and vx can address 256 registers. 0801 1500 - move-object/from16 v1, v21Move the object reference in v21 to v1. 09 move-object/16 0A move-result vx Move the result value of the previous method invocation into vx. 0A00 - move-result v0Move the return value of a previous method invocation into v0. 0B move-result-wide vx Move the long/double result value of the previous method invocation into vx,vx+1. 0B02 - move-result-wide v2Move the long/double result value of the previous method invocation into v2,v3. 0C move-result-object vx Move the result object reference of the previous method invocation into vx. 0C00 - move-result-object v0 0D move-exception vx Move the exception object reference thrown during a method invocation into vx. 0D19 - move-exception v25 0E return-void Return without a return value 0E00 - return-void 0F retur