- 2
- 0
- 约1.08万字
- 约 6页
- 2015-12-22 发布于湖北
- 举报
RegulationsPertainingtoLiftTrucks-LDLCraneTraining.doc
REGULATIONS pertaining to LIFT TRUCKS
Excerpts from
OCCUPATIONAL HEALTH AND SAFETY ACT(OHSA)REGULATION 213
Section 93
All vehicles, machinery, tools and equipment shall be maintained in a condition that
does not endanger a worker.
No vehicle, machine, tool or equipment shall be used,while it is defective or hazardous;
b) when the weather or other conditions are such that its use is likely to endanger a worker: or
while it is being repaired or serviced, unless the repairs or servicing requires that it be operated.
All vehicles, machines, tools and equipment shall be used in accordance with any
operating manuals issued by the manufacturers.
For vehicles, machines, tools and equipment rated at greater than 10 horsepower, copies of any operating manuals issued by the manufacturers shall be kept readily available at the project.
Section 94
All mechanically-powered vehicles, machines, tools and equipment rated at greater than 10 horsepower shall be inspected by a competent worker to determine whether they can handle their rated capacity and to identify any defects or hazardous conditions.
The inspections shall be performed before the vehicles, machines, tools or
equipment are first used at the project and thereafter at least once a year or more frequently as recommended by the manufacturer.
Section 95
1) Every replacement part for a vehicle, machine, tool or equipment shall have at least
the same safety factor as the part it is replacing.
2) No modification to, extension to, repair to or replacement of a part of a vehicle,
machine, tool or equipment shall result in a reduction of the safety factor of the
vehicle, machine, tool or equipment.
Section 96
No worker shall operate a vehicle at a project unless he or she is competent to do so.
However, a worker being trained in the operation of a vehicle may operate it while being instructed and supervised by a competent person.
Section 97
Every vehicle other than a trailer shall be equipped wit
您可能关注的文档
- NanoformEngSpec.doc-SterlingInt.doc
- NationalProgrammeforDevelopmentoftheMachineTool.PDF
- NaturalDietforDogs–WebResources.doc
- NaturalSciences,Mathematics,Physics,Informatic.doc
- NCPROGRAMMING–Part1-FoundationCoalition.ppt
- NEWPROCESSINGMANUAL.doc
- NMStateDangerousDogAct.doc
- NonTraditionalManufacturingProcesses-Plymouth.doc
- Novelon-linespeedprofilegenerationforindustrial.PDF
- NSIAD-97-4ExportControlsSensitiveMachineTool.PDF
原创力文档

文档评论(0)