SAMSUNGMachineTools-DynamicInternational.docVIP

SAMSUNG Machine Tools MCV-1060 VERTICAL MACHINING CENTER P/L #6910 July 8, 2013 MACHINE SPECIFICATIONS CAPACITY X axis travel 98.40” Y axis travel 41.70” Z axis travel 35.40” Table size 110” x 41.70” Table loading capacity 11,020 lbs Table T-slot spacing x width (7) - 5.91” x 0.87” SPINDLE Distance from table top to spindle nose 7.87”~43.3” Distance from column to spindle center 43.3” Spindle Taper CAT 50 Spindle speed (Standard / option) 6,000 rpm AC Spindle Motor 25 hp Max. spindle torque 452 ft-lbs AUTO TOOL CHANGER Magazine capacity 40 Tool Shank CAT50 Pull stud type 90° type Maximum tool diameter [Adjacent empty] 4.33” [7.87”] Maximum tool length 13.78” Maximum tool weight 33.0 lbs Tool selection method Random Tool changing time(T-T) 2.5 sec FEED RATE Rapid traverse(X/Y/Z) 630/ 630/ 630 ipm Cutting feed rate ipm 394 ipm SERVO DRIVE SYSTEM Feed motor (X/Y/Z) 8.1hp/ 8.1hp/ 8.1hp Ballscrew diameter (X/Y/Z) 2.16”/2.48”/2.48” Slide ways (X/Y/Z) Box Way Slide Way Span (X/Y/Z) 31.50”/114.17”/27.17” Slide Way Width (X/Y,/Z) 6.69”/7.87”/8.27” GENERAL Floor space (L x W x H) 264” x 183” Machine weight 55,116 lbs Power required 48 kVA Voltage 220V + 10% / 3 Phase CNC system Fanuc 0iMD MACHINE CONSTRUCTION FEATURES Fine Grain one-piece Meehanite cast iron bed Rigid triangular rib body structure for minimizing vibration and deformation under heavy machining Anti-heat displacement spindle and headstock design Ultra precision and high rigidity spindle bearings Wide induction hardened box ways High precision pre-tensioned large diameter ball screws for all axes Easy chip removal through built-in(internal) dual screw conveyors Powerful reliable Fanuc motors and drives system Automatic lubrication through metered piston d