SequenceofBasicJobSteps-SLAC.docVIP

Sequence of Basic Job Steps Potential Hazards Controls Recommended Actions 1. General working environment Egress Emergency response Know location of exits, fire equipment, and safety equipment such as eyewashes. Never work alone in the area. Signage: “Fire Extinguisher” sign above each fire extinguisher. Single turn handles on exit doors. Doors remain unlocked when occupied. Aisle space maintained. Emergency lighting system in each room Signage: “Exit” or “Not an Exit” on portals. 2. Walking and working surfaces Slips, trips, and falls over transient hazards (power cords, temporarily stored machinery, and work-in-progress) Remove trip hazards to keep aisles clear. Clean up spills immediately. Do not run. Keep eyes on path while walking. 3. Computer, desk, shelving, file cabinet chairs Head injury from objects falling off shelves Strains from moving equipment, furniture Secure shelving securely to wall. Place heavy objects on lower shelves and lighter objects on higher shelves. Do not sit under shelving with heavy objects Do not move heavy furniture alone Avoid back injuries by lifting or pushing with legs not back. 4. Extensive computer work, data entry / email; talk on phone Carpel Tunnel injuries Back pain Eye strain Have ergonomic evaluation preformed and workspace adjusted accordingly Use good posture when at workstation Be sure to use ergonomically correct chair Take regular breaks (~every 15 minutes or so) 5. Electrical Cords Electrical shock Trips Ensure electrical cords are not daisy changed, in good condition and placed so that they will not cause a trip hazard. 6. Paper, Boxes, etc. Combustibles Minimize paper, boxes and other combustible material in office area 7. Lifting / moving: equipment, boxes Strain; muscle sprain Lift properly, with legs – not back. Dont lift more than comfort level; Get hand truck, forklift or assistance when moving heavy / bulky boxes, equipment 8. Walking around the site -Slip, trip, fall, stairs Trips; falls