合肥市某高校综合楼设计 大学本科毕业论文计算书.docVIP

本科毕业论文（设计） 职称学历： 教务处制安徽新华学院本科毕论文（设计）独创承诺书 本人按照毕业论文（设计）进度计划积极开展实验（调查）研究活动，实事求是地做好实验（调查）记录，所呈交的毕业论文（设计）是我个人在导师指导下进行的研究工作及取得的研究成果。据我所知，除文中特别加以标注引用参考文献资料外，论文（设计）中所有数据均为自己研究成果，不包含其他人已经发表或撰写过的研究成果。与我一同工作的同志对本研究所做的工作已在论文中作了明确说明并表示谢意。 毕业论文（设计）作者签名： 日期： 合肥市某高校综合楼设计 摘 要 本工程为某高校综合楼，采用框架结构，主体为五层，本地区抗震设防烈度为7度，场地类别为II类场地，基本雪压0.4 kN/m。楼﹑屋盖均采用现浇钢筋混凝土结构。 首先，进行建筑设计，包括对建筑空间的研究及对构成建筑空间的建筑物实体的研究，通过对建筑平面的功能分析，进行建筑物使用部分、交通联系部分的平面组合设计，进而对建筑体型组合和立面、剖面的设计。然后再根据建设用地条件，考虑建筑分类，建筑在总平面中的布置。 建筑设计完成后，根据建筑类型选择结构体系，根据以往经验对结构构件进行初步估算，确定计算简图，得出荷载，线刚度，重力荷载代表值等数据，从而验算地震作用对房屋所产生的层间位移。再根据竖向荷载计算梁和柱的内力并进行组合，对梁和柱截面进行设计。以及对基础的设计和计算，楼梯的设计和计算。 关键词：框架结构；抗震设计；荷载计算；内力计算 The Design for a complex of College in Hefei Abstract This project is a building for a university of complex which is consist of framework structures for a san-storey main. The earthquake seismic intensity of the local is 7 degrees，and the classification of this site is 2 venues. The basic snow pressure is 0.4 kN/m. Cast-in-place reinforced concrete structures were used in the floors and roofs. The first step is to carry out architectural design, including the study of architectural space and the physical form of buildings of architectural space research，Then according to the function analysis of this architectural plane ， the portfolio plane design of the building，s part use and transportation links were carried out .Further more , the body shape and to device the elevation 、Then according to the conditions of construction land, building classification and layout in the general plane were considered. After the architectural design, the structural system based on building type was chosed, the structural components based on previous experience preliminary was estimated, in order to determining the calculation diagrams, the value obtained on behalf of gravity load, linear stiffness and other data, thereby checking the role of earthquake on produced by housing laye