南京市某综合大厦空调工程设计 大学本科毕业论文.docVIP

南京市某综合大厦空调工程设计 Air Conditioning Engineering Design for an Integration Building in Nanjing 届 　 系 专 业 学 号 学生姓名 指导教师 完成日期 年 月 日 摘 要 本设计为南京市某大厦空调设计，该建筑为地下一层地上六层公用建筑。地下1层为机房和车库，地上一层为商场，到六层为。 本设计范围为：空调系统的空气处理、新风及风系统、。主要内容为负荷计算、空调系统方案选择、风系统设计及气流组织计算、风管水力计算、空调设计选型。 结合工程实际设计资料(经济效益、环境效益)，要求各功能房间采用全年舒适性空调，一层为全空气系统，六层为风机盘管加新风系统。最后对整个设计进行了总结，并对有待于进一步研究的问题进行了概述，对今后的设计工作提出了一些建议。强调空调设计应尽量满足业主的要求及节能规范。本设计依据参考并执行国家相关标准及规范。空调风机盘ABSTRACT This design for a building for Nanjing air conditioning project design, the building is underground layer under ground and 6 public construction. A layer underground for refrigeration machine room and the garage, the ground layer, 2 for stores, three layer for KTV, four to six layers as guest room. The scopes of this thesis are the air conditioning system, the new wind and air system, cold and heat source. The main contents are load calculation, air-conditioning system program selection, wind and air distribution system design calculations, duct hydraulic calculation, design and selection of cold and heat source. Combined with the engineering practice design material (economic, and environmental benefits), and required the function rooms adopt year-round comfort air conditioning, one layer, 2 for all air system, water system for air three layer, layer 4-6 fan coil system. At the end of this paper, I summarize the whole design and the outline of the problem which needs further study and also make some suggestions for future work. It is the design of air conditioning that should try to satisfy the requirements of home owners and the energy code. This design refers to relative national standards and norms which have been closely executed. Keywords: Air conditioning All–air system Fan-coil system 目 录 第1章　绪　论 1 1.1　国内外研究现状 1 1.2　设计目的 1 1.3　设计内容 1 第2章 工程概况 2 2.1 工程概况 2 2.2 气象参数 2 2.3 围护结构参数 2 第3章　负荷计算 3 3.1 负荷计算 3 3.1.1 外墙和屋面的冷负荷 3 3.1.2 外窗冷负荷 3 3.1.3 人体冷负荷 4 3.1.4 灯光冷负荷 5 3.1.5 设