AutomaticFireSprinklers.docVIP

SECTION 13930 Automatic Fire Sprinklers PART 1 GENERAL 1.01 SCOPE OF WORK1.02 RELATED WORK1.03 QUALITY ASSURANCE1.04 REFERENCES1.05 SUBMITTALS PART 2 PRODUCTS 2.01 MATERIALS AND EQUIPMENT PART 3 EXECUTION 3.01 OCCUPANCY SPECIFIC DESIGN3.02 INSTALLATION3.03 PAINTING AND MARKING OF PIPING3.04 SANITIZATION3.05 FIELD QUALITY CONTROL PART 1 GENERAL 1.01 SCOPE OF WORK A. General: 1. Provide a complete sprinkler system or modification to an existing system as required by contract agreements. Systems are to be hydraulically calculated and comply with state and local code and specifications in this standard. Sprinkler retrofits in existing buildings shall meet current code and specifications rather than being designed to match existing portions of the structure, except when making changes to existing pipe-scheduled wet-pipe sprinkler systems, as allowed by NFPA 13 and local ordinances. 2. Include all plant facilities, labor, material, equipment and service necessary for the design, fabrication and installation of the automatic sprinkler system and piping. 3. Obtain all necessary permits and prepare shop drawings and submittals as specified in section 1.05. Permits will generally be required from the authority having jurisdiction which is Santa Clara County Fire Marshal (SCCFM) for projects in the main campus and School of Medicine, or Palo Alto Fire Department (PAFD) for off-campus properties within the City of Palo Alto or Office of Statewide Health Planning and Development (OSHPD) for the Stone Complex (Stanford Hospital/School of Medicine Buildings). 1.02 RELATED WORK General: Consult Stanford University Facilities Design Guidelines (www-facilities.S/fdcs/) for other applicable guidance. 1. Section 01310 Environmental Health and Safety, which includes asbestos and lead management. 2. Section 02321: Trenching Backfilling and Compacting 3. Section 02950: Site Restoration Rehabilitation 4. Section 02510: Domestic and Lake Water System 5. Section 13850 Fire A