drema2004-MTP.docVIP

DREMA 2004 New products List of products presented for the first time at DREMA 2004 FairPrepared on the basis of materials submitted by exhibitors by 15 March 2004. Deta Polska Sp. z o.o.ul. Wrzesinska 4362-200 GnieznoPavilion 3, stand 49 Hydraulic briquetting machine COMAFER DINAMIC 110 NHydraulic briquetting machine designed for briquetting wood sawdust of maximum permissible humidity of 17%. Engine power output 10 HP, briquette diameter 65 mm, the basic version is equipped with cooling system (air / oil), compression force 900 kg / cm2, processing capacity approx. 110 kg /hour. Fitted with a temperature gauge and oil level gauge. AKE Polska Sp. z o.o.ul. Witosa 798-400 WieruszówPavilion 3A, stand 65 HSK PLUSNew solution for securing the tool. The machine achieves 36000 rpm, which enables optimum operating speed and higher feed rate. Use of this new solution for securing milling cutters does not require additional and expensive fitting equipment. HM saws for mini-frame sawing machines Saws with sintered carbide for mini-frame sawing machines for use in vertical cutting frames. Considerably higher service life leads to shortening idle time required for tooling change. High dimensional precision and clean surface after machining. HM saws for frame sawing machinesHM saws with sintered carbide for use in frame sawing machines. Very durable tooling helps to reduce idle time needed for tooling change. High precision and cutting accuracy of the required sizes is combined with achieving ideally smooth and clean surface after cutting. HM bandsawBandsaws with sintered carbide (HM). Properties of saws of that type include higher output, 50x higher durability and better cutting quality. HM bandsaw helps to achieve precisely the required cutting dimensions and allows for using higher operating speed which reduces production costs. 3 M Poland Sp. z o.o.Al. Katowicka 11705-830 NadarzynPavilion 4, stand 5 Scotch? Mini -Weld Gluing SystemScotch? Mini -We