FEM_Structure_Distortion_AnalysisPM#7.ppt-ESO.pptVIP

OFFRE XXXX Design, Manufacture, Transport and Integration on-site in Chile of ALMA Antennas FEM Structure Distortion Analysis PM#7 , 2006 Reproduction interdite ? ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas Reproduction interdite ? ALMA EUROPEAN CONSORTIUM Reproduction forbidden Design, Manufacture, Transport and Integration in Chile of ALMA Antennas FEM Mechanical Model FE deformation Analysis Flow Structural FE ANSYS Model FEM Deformation Analyses FE NASTRAN Model ERROR BUDGET Input Wind Analysis (FLUENT) Thermal Analysis (THERMICA/ESATAN) Interfacing Tools Pressures Temperatures Displacements Translation Rotations Mapping FEM Mechanical Model New Ansys FEM has been converted into MSC.NASTRAN Previously defined procedures and rules have been applied (e.g. avoiding of drilling stiffness, re-modelling of entities not automatically translated as springs, rigid links and lay-up orientations) Re-modelling changes are as agreed previously with EIE Coherence between Ansys and Nastran FEM is demonstrated by comparison of the results ANSYS 10.59 6 10.41 5 10.06 4 9.37 3 8.80 2 8.25 1 Cycles[Hz] MODE n. FEM Mechanical Model Normal Modes Analysis NMA was carried out as preliminary check of NASTRAN Model Results of Nastran Model are the same than Ansys model Mode#2 - Frequency 8.89 Hz NASTRAN 10.6 6 10.41 5 10.07 4 9.39 3 8.89 2 8.15 1 Cycles[Hz] MODE n. Scale Factor: 100 FEM Mechanical Model MSC.NASTRAN analyses models Reference FEM model have been rotated about both Elevation and Azimuth Axis 15 antenna configurations required by different analyses kind have been obtained 0° Azimuth 0° Elevation 60° Azimuth 0° Elevation 0° Azimuth 0° Elevation 45° Azimuth 45° Elevation FEM Mechanical Model – Gravity Deformation analysis 7 ANALYSIS CASES of self-weight Azimuth 0°, Elevation 0°-15°-30°-45°-60°-75°-90° Deformation under gravity load Azim