FullPDF-IOSRJEN.PDFVIP

IOSR Journal of Engineering (IOSRJEN) e-ISSN: 2250-3021, p-ISSN: 2278-8719 Vol. 3, Issue 2 (Feb. 2013), ||V1|| PP 10-19 Effect of Soaking Time And Applied Load On Wear Behavior of Carburized Mild Steel 1 2 3 4 Shristee Singh , Dr. Dushyant Singh , Kalpana Sachan ,Abhishek Arya ME II Year, Material Science And Engineering, Department Of Mechanical Engineering , BUIT, Bhopal (M.P.) Abstract: The Heat Treatment and Carburization has been acknowledged by some means of improving the various properties of metals and alloys. For this investigation before heat treated , heat treated and carburized mild steel were selected. Three Heat Treatment process namely Quenching, Carburizing and Tempering were done. In the present investigation the Mechanical and Wear behaviours of mild steels Carburized at 8600 C different Soaking time 2 hour(120min), 2 hour 30 minutes(150min) and 3 hour(180min). The aim has been to examine the effects of these different Soaking Time and conditions on the Mechanical and Wear properties of the Carburized mild steels. 0 0 For above purpose firstly the mild steels are carburized at 860 C temperature and then it is Tempered at 200 C for 1 hour after this the Carburized and Tempered mild steels are subjected for different kind of test such as Abrasive Wear Test, Hardness Test and Tensile Test. Abrasive Wear behaviour of these mild steels was investigated by using the Dry Sand Abrasion Test Rig (TR-50) Machine. This paper further examines the effect of soaking time, applied load and abrasive wear behavior of carburized mild steel have been studied in detailed Key Words: Abrasive Wear, Car