基于S7-300与Eview触摸屏的五层电梯监控系统设计.docVIP

本科毕业设计（论文） 题目 基于S7-300与Eview触摸屏的 五层电梯监控系统设计 学 院 电气与自动化工程学院 年 级 专 业 班 级 学 号 学生姓名 指导教师 职 称 中 级 论文提交日期 基于S7-300与Eview触摸屏的五层电梯监控系统设计 摘要 本文设计五层电梯监控系统，首先介绍了电梯的基本结构、运行的原理，论述PLC 在电梯控制系统中的运用。深入分析了电梯的工作原理，详细介绍PLC控制电梯系统的软件设计方法。给出了基于S7-300PLC的5层电梯控制系统的设计方案，实现电梯加减速运行、显示楼层、呼叫信号保持、运行方向判断、手动和自动关门等基本功能。 为了直观有效监测电梯运行状态，本文以Eview触摸屏作为上位机设计和组态监控界面，通过上下位机的通信，实现了电梯运行状态的实时监控和故障报警。所设计的监控系统操作简单，画面清晰直观，达到了设计要求。 关键字：电梯 PLC 触摸屏 监控系统 Five-story elevator monitoring system design based on S7-300 and Eview touch screen ABSTRACT This is a five-story elevator control system design, first introduced the basic structure of the elevator, the principle of operation, discusses the use of PLC in the elevator control system. The working principle of the elevator is analyzed very in-depth , PLC elevator control system software design methods are introduced in detail. It also raises the S7-300 PLC-based five-story elevator control system design, the elevator acceleration and deceleration run, floor indicator ，call signal to maintain the running direction of the judge, manual and automatic door closers and other basic functions are achieved. In order to visually effective monitoring the running of the elevator , the Eview touch screen as the design and configuration of the host computer monitoring interface, through the upper and lower computer communication, the real-time monitoring of running the elevator and fault alarm are realized. This design of the monitoring system is simple, clear and intuitive screen, it also meet the design requirements. key words: elevator PLC touch screen monitored control system 目 录 1. 绪论 1 1.1背景与意义 1 1.2 电梯的发展概况 1 1.3课题研究的内容 2 1.4本文内容组织安排 2 2. 电梯模型与电气线路设计 3 2.1电梯实训装置结构总体介绍 3 2.2 井道固定架与升降传动结构 4 2.3 层控制按钮面板与轿厢 4 2.4 硬件总体结构 5 3. 硬件选型与接线 7 3.1 可编程控制器的选型 7 3.2 STEP7硬件组态 8 3