LaNouvelleSéquenceMICRO-MEGA-JanouchDental.pptVIP

Cycle Video Basic sequence The protocol SC1 and SC2 Advantages of SC1 SC2 Inactive tip Extended helical machining up to the coronal region increases the instrument flexibility. Less stress on the instrument Better debris elimination and more efficient cleaning owing to the asymmetrical cross section of the SC1. No zipping The SU instrument The root canal finishing SU smoothes the root canal walls. Owing to its asymmetrical cross section, it recapitulates the action of the first two instruments SC1 and SC2, thus respecting the tapered shape of the canal. It performs excellent upward elimination of the dentine debris and an improved cleaning. An adequate canal preparation with an apical finishing of.06. Root canal cleaning and shaping + finishing The MICRO-MEGA? + For a successful canal preparation, apical finishing is essential: MICRO-MEGA? offers an additionnal adapted solution with specific instruments: AS30 AS35 AS40 The apical finishing The protocol The apical finishing Shaping down to the working length. Essential for an accurate finishing of the apical third. The irrigating solution penetrates to the apical third. Efficient disinfection. Optimal cleaning. AS30 AS35 AS40 Advantages Instruments dedicated to the apical zone are tapered at .06. Asymmetrical cross section Extended helical machining up to the coronal region Increased flexibility and performance of the instrument for a successful apical finishing. Why using .06 taper instruments at the end of the treatment?? Tapering at .06 enables a debridement and a disinfection corresponding to biological constraints of the initial root canal treatment. ? Improved flow of the irrigating solution in the canal. ? Facilitated obturation. Clinical case Clinical case of Dr JP Mallet: UL6 shows secondary pulpitis with a carious lesion on the distal aspect observed on preoperative radiographs (eccentric and centric incidence). Root canal shaping using the Revo-S? sequence with an apical shaping