PresentationTheSUEMOSGAZLaboratoryofStructural.pptVIP

* * Laboratory of Structural Materials Physical and Mechanical Properties Analysis The Laboratory is aimed at the incoming inspection of tubular and reinforcing goods operated by SUE “MOSGAZ”, as well as the check of physical and mechanical properties of third parties’ materials.  Diagram of the Material Properties Analysis Using Destructive Inspection Techniques  Selection of semi-finished goods and workpieces Production of samples complying with the standards of semi-finished goods Quality control of produced samples Testing Keeping records concerning the results of testing Making finding reports containing further recommendations Basic Stages of the Metal Samples Preparation Process Gas Cutting Milling Metal Cutting Turning Grinding Basic Stages of the Plastic and Polymer Composite Samples Preparation Process Milling Metal Cutting Press tool moulding Grinding Quality Control of the Produced Samples Ultrasonic thickness gauge Profiler (profilometer) Adhesiometer Electronic vernier calliper Micrometer Distribution of Types of Testing between the Testing Machines Versatile testing machine Instron 3369 with heat chamber Types of Testing testing of plastic and polymer tension at elevated temperatures (up to +250o С) and at lower temperatures (up to -70o С) (according to the all-Union State Standard (AUSS) 11262-80, AUSS 25.601-80, AUSS 25.603-82) testing of plastic and polymer compression at elevated temperatures (up to +250o С) and at lower temperatures (up to -70o С) (according to AUSS 4651-82, AUSS 25.602-80); testing of adhesion strength in case of detachment and displacement (according to AUSS 14760-69, AUSS 14759-69); testing of detection of the metal-adhesion strength in case of exfoliation (according to AUSS 411-77); testing of cylindrical metal samples tension at elevated temperatures (up to +250o С) and at lower temperatures (up to -70o С) (according to AUSS 1497-84, AUSS 6996-66, AUSS 9651-84, AUSS 11150-84); testing wire stretching (according