UCPClutchPedal–InstallationInstructions-BimmerWorld.PDFVIP

UCP Clutch Pedal – Installation Instructions Thank you for purchasing the UCP Clutch Pedal. The UCP is an allaluminum shortthrow clutch pedal for modern BMWs designed to replace the plastic BMW clutch pedal arm. Factory nylon split bushings are replaced with selflubricating bronze bushings designed to last the life of your car. The slightly shorter throw and lower resting point of the clutch pedal arm allows for quicker shifts and gives the car a more sporty feel. Three overcenter spring mounting locations allow the user to adjust the spring pressure for a more positive feel. Before you begin, make sure the pedal will fit your car and you have the correct tools to finish the job. This pedal kit was originally designed and developed by racers who wanted more performance and feel from their manual BMW on the track. Due to the easy install and factory looks, it is a perfect performance enhancement for any sportydriven modern manual BMW. The quality and performance of this pedal kit is extremely important to us. Any positive feedback you can give us on the forums or our Facebook page would be honored and greatly appreciated. On the other hand if you have any problem with this pedal, please give us the chance to fix the problem or issue for you and make things right. Thanks! Team UCP Fitment Check The UCP is designed to be a direct replacement for BMW part number 35316761310, which is the plastic factory clutch pedal in lefthanddrive (non5Series) manual BMWs from 2006/7 (postE46) and up (i.e. E90/92, 1Series, F30/32, F80 M3, F82 M4, etc.). Please doublecheck that your vehicle and the UCP are compatible by checking the current compatibility list located here /ucpcompatibilitylist This pedal will not fit E36 or E46 models – nor does it fit any 5Series or righthandd