Word-IECEE.docVIP

TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING Power cables with extruded insulation and their accessories for rated voltages from 1kV (Um=1,2kV) up to 30kV (Um=36kV) Part 1: Cables for rated voltages of 1kV (Um=1,2kV) and 3kV (Um=3,6kV) IEC 60502-1 2.Edition (2004-04) + Am.1(2009-09) R=Required by Lab S=May be subcontracted Clause Measurement/testing Testing / measuring equipment / material needed Subcontracting 16 Sample tests 16.4 Conductor examination Vernier caliper or micrometer caliper R 16.5 Measurement of thickness of insulation and of non-metallic sheaths(including extruded separation sheaths, but excluding inner extruded coverings) Measuring microscope or profile projector of at least 10 x magnification. R 16.6 Measurement of thickness of lead sheath 16.6.1 Strip method Micrometer with a plane faces of 4mm to 8mm diameter and an accuracy ±0,01mm. R 16.6.2 Ring method Micrometer having either one flat nose and one ball nose, or one flat nose and a flat rectangular nose 0,8mm wide and 2,4mm long with an accuracy ±0,01mm. R 16.7 Measurement of armour wires and tapes 16.7.1 Measurement on wires Micrometer having two flat noses to an accuracy of ±0,01mm. R 16.7.2 Measurement on tapes Micrometer having two flat noses of approximately 5mm in diameter to an accuracy of ±0,01mm. R 16.8 Measurement of external diameter Micrometer, profile projector, measuring tape, a direct reading diameter tape or similar apparatus. R 16.9 Hot set test for EPR, HEPR and XLPE insulations and elastomeric sheaths Oven with natural air flow or air flow by pressure, airflow rate: 8～20 completed air changes per hour; grips, weights, system for measurement of the elongation. R 17 Type tests, electrical 17.1 Insulation resistance measurement at ambient temperature Water tank; thermometer; insulation resistance tester with DC source between 80 V and 500 V. R 17.2 Insulation resistance measurement at maximum conductor temperature Heated water tank, the