4x4HalfDuplexSwitch-FormericaOptoelectronicsInc.PDFVIP

1.25G Ethernet Optical Bypass Module PRODUCT NUMBER: OBM-B3BH4-E01 Specification 1.25G Ethernet Optical Bypass Module Quad Ports 1.25G Base-SX O B M – B 3 B H 4 – E 0 1 Version 04 FormericaOptoelectronics Inc. 5F,-11, No.38,Taiyuan,ZhubeiCity, 1 HsinchuCounty 302, Taiwan Ph: +886-3-5600286 Fax: +886-3-5600239 1.25G Ethernet Optical Bypass Module PRODUCT NUMBER: OBM-B3BH4-E01 Product Overview Formerica’s Quad Port 1.25 Gbit/s Optical Bypass Module(OBM) is a compact module that contains four 1.25 G Base-SX ports and can be integrated with I/O port controllers in a Network Interface Card (NIC). This module is targeted for maintaining network connectivity when power failure or system fails in an In-Line Network System. Formerica’s Quad Port 1.25 Gbit/s Optical Bypass Module supports Normal and Bypass modes, and can be configured to perform the Block mode. In Normal mode, two ports function independently. In Bypass mode, signal packets received from one port are loop-backed to the adjacent port. In Block mode, the module blocks the route. Formerica’s Quad Port 1.25 Gbit/s Optical Bypass Module can Bypass or Block its I/O ports upon a host system failure, power off, or by software request. Formerica’s Quad Port 1.25 Gbits Optical Bypass Module can be integrated with any brand’s Controllers CPU. It is suitable for connecting with in-line equipment for power failure or system maintenance. When the In-Line unit is not on or is in bypass mode, the relays within the OBM are set to brid