GeneralLicensingClass.pptVIP

G7C04 What circuit is used to combine signals from the IF amplifier and BFO and send the result to the AF amplifier in a single-sideband receiver? RF oscillator IF filter Balanced modulator Product detector  G7C05 Which of the following is an advantage of a transceiver controlled by a direct digital synthesizer (DDS)? Wide tuning range and no need for band switching. Relatively high power output. Relatively low power consumption. Variable frequency with the stability of a crystal oscillator. G7C06 What should be the impedance of a low-pass filter as compared to the impedance of the transmission line into which it is inserted? Substantially higher About the same Substantially lower Twice the transmission line impedance  G7C07 What is the simplest combination of stages that implement a superheterodyne receiver? RF amplifier, detector, audio amplifier RF amplifier, mixer, discriminator HF oscillator, mixer, detector HF oscillator, pre-scaler, audio amplifier G7C08 What type of circuit is used in many FM receivers to convert signals coming from the IF amplifier to audio? Product detector Phase inverter Mixer Discriminator G7C09 Which of the following is needed for a Digital Signal Processor IF filter? An analog to digital converter A digital to analog converter A digital processor chip All of the these answers are correct G7C10 How is Digital Signal Processor filtering accomplished? By using direct signal phasing By converting the signal from analog to digital and using digital processing By differential spurious phasing. By converting the signal from digital to analog and taking the difference of mixing products  G7C11 What is meant by the term “software defined radio” (SDR)? A radio in which most major signal processing functions are performed by software. A radio which provides computer interface for automatic logging of band and frequency. A radio which uses crystal filters designed using software. A comp