基于FPGA的SOC数字温度计_论文.docVIP

摘 要 本设计中温度传感器使用18B20，以EP3C10E Cyclone III 芯片和NiosII 处理器为基础，采用软硬件结合的设计方式，通过控制用FPGA编写的18B20和数码管IP核，实现温度测量和显示功能，最后又在硬件上通过对其进行调试和验证。 关键词：FPGA；NiosII；温度计；18B20 Abstract In this design, temperature sensor using 18B20, EP3C10E Cyclone III chip and NiosII processor as the foundation, using the combination of hardware and software design, through the control of FPGA prepared by the 18B20 and digital tube IP core, realize the temperature measurement and display function. Finally in the hardware through carries on the debugging and verification.Key words: FPGA；NiosII； Thermometer；18B20  目 录 引言 1 1