打包钢带生产线收卷控制系统地设计.pdf

打包钢带生产线收卷控制系统的设计 中文摘要 打包钢带生产线收卷控制系统的设计 中文摘要 本文介绍的自动收卷控制系统是基于西门子S7-300 系列的PLC 的设计，系统主 要采用了西门子最新的T-CPU 作为核心控制器，SINAMICS S120 作为传动控制器来 完成钢带的开卷、切割、修边、传送、热处理、收卷等工作。其中收卷工作室整个生 产过程的重点工序。 论文主要完成了收卷系统的方案设计，并介绍了其系统硬件以及软件进行设计， 同时用上位机对其运动进行监控。 首先，分析了钢带生产线收卷系统的构成，为满足生产要求及实际现场状况，设 计了总体的方案。 其次，进行硬件选型与实验，完成系统连线。 然后，在硬件搭建完成的基础上，为了实现各种基本运动功能，设计基于PLC 的 打包钢带生产线收卷控制系统总体控制软件，实现参数设置、收卷运动和轨迹显示等 功能的有机统一。 最后，编写用WINCC编写上位机软件来实现对收卷系统工作的实时监控。 经过一系列检验与调试，现系统已经可以稳定运行生产。 关键词：收卷控制系统、PLC 、SINAMICS S120 作 者：吴秉羲 指导教师：张茂青 教授 Abstract The Design of Packing Steel Strip Production Line Rolling Control System The Design of Packing Steel Strip Production Line Rolling Control System Abstract The automatic winding control system introduced in this thesis is based on the design of the PLC in Siemens S7-300 series, the system mainly adopts the latest T - CPU in Siemens as the core controller, SINAMICS S120 as the driving controller to accomplish steel belt pulling, cutting, trimming, transport, heat treatment, winding, etc. Among them, the winding part is of top importance in the whole procedure. The thesis mainly completed the design scheme of the winding system, and introduces the hardware and software system to design, using a up computer to monitor its movements at the same time. Firstly, we analyzed the composition of the steel strip production line winding system to meet the production requirements and actual situation, and designed the overall scheme. Secondly, we selected the type of hardware and did some experiments, completed the attachment of