BodySystem-FacultyofMechanicalEngineering.pptVIP

Sub-frame Full Frame Body System Functional Requirements Provide seating comfort to the required number of passengers Provide easy ingress and egress Provide safe driving environment Provide easy access to driver controls Provide means to attach other major systems and components Provide the driver with required vision Prevent water from entering passenger/engine/luggage compartment Body System Safety Requirements Protect passenger from frontal crash Protect passenger from rear crash Protect passenger from side impact Protect passenger from a roll-over accident Protect passenger from head injury Protect pedestrian from an accident Prevent seat from detaching from the floor Body System NVH Requirements Control tactile responses Control noise levels in the passenger compartment Control wind noise Control mirror vibrations Isolate vibrations due to engine Body System Durability Requirements Make sure the structure will endure loads throughout its life Make sure all attachment brackets will endure loads Make sure body will not rust during required life Body System Performance Requirements Floor is capable of supporting passengers Load floor is capable of supporting luggage Roof is capable of supporting luggage rack Body is sufficiently stiff Prevent extensive damage during minor accidents Able to tow a trailer or able to be towed Door System Performance Requirements Door opens and closes properly lasting required years Door will not allow intrusion during side collision Door closing effort is satisfactory to the customer Door is sufficiently stiff Door prevents wind noise Door locks open/close required number of times Door window goes up/down required number of times Door is not damaged by slamming Hood System Performance Requirements Hood opens and closes properly lasting required years Hood is sufficiently stiff Hood does not flutter Hood is not damaged by slamming Lift-gate System Performance Requirements Lift-gate opens and closes properly lasting require