TGO辅助程序的设计.pdf

摘 要 能区分同步环与异步环，不能按照我国规范判断闭合环差的固有缺陷。且 TGO 辅助程序采用多种拟合模型在 GPS 高程拟合方面很好的补充了 TGO 软件。 TGO 因在基线质量检核（重复基线检核、同步环和异步环检核）的细节项 目和成果报告的输出内容及格式不符合我国 GPS 测量规范的要求，且在高程转 换方面的问题，给我国广大测绘工作者造成了诸多不便。作者结合 TGO 已有的 现成输出数据和输出成果，应用 VB 语言，依据我国 GPS 测量规范（规程）的 有关限差规定编写 TGO 辅助程序，为 GPS 数据处理报告的编写和质量的检核提 供了极大的方便，解决了实际中的问题。 关键词：TGO 数据交换文件 同步环 异步环 GPS 高程 II Abstrcat The Aided Program Design of TGO Introduction of the author: Bai Tie yong, male, was born in Nov, 1985 whose tutor was Associate Professor Yu Dai jun. He graduated from Chengdu University of Technology in Photogrammetry and Remote Sensing major and was granted the Master Degree in June, 2010. Abstract With the continuous development and spread of global positioning system and the improvement of GPS measurement technology, GPS positioning technology has been widely used in control measurement, deformation monitoring, precision engineering surveying and aerial photogrammetry and remote sensing fields now, particularly in the measure of control network. On accuracy, time, or from the economic point of view, Photo control point connection surveyed by GPS technology is superior than the conventional measurements, so GPS technology is worth promoting the application in small and medium scale Aerial Photogrammetry. TGO (Trimble Geomatics Office) is a business software for GPS static and dynamic measurement data processing which is developed by the Trimble Navigation Ltd. of USA. It is a adjustment software with powerful function, friendly interface, high automation, eas