SyncroMax(韩秀).docVIP

　3D模拟整形说明书 ? SyncroMax(韩秀) 手册mamual (3D模拟整形Soultion) Simulative reshaping SyncroMax(韩秀)手册 ? SYNCROMAX是世界首创3D模拟整形Soultion，不使用高价的3D扫描，可只用两张相片(正面，侧面)复原3D影像，在性价比上是非常优秀的产品。 SYNCROMAX is the first 3D simulative reshaping.It doesn’t adopt expensive 3D scanning and just needs 2 photographs(front/reverse) to recover 3D image.It is a very excellent product in the cost performance. SYNCROMAX分为3个方式（MODE） SYNCROMAX is devided into 3 mode. -EZ图像image MODE -Half 3D MODE -Full 3D MODE ? EZ图像方式是很容易使用的，不需要准备阶段而可直接使用的初级方式（MODE）。Half 3D方式（MODE）是中级方式，有若干准备阶段，可实际模拟整形时可以使用得很方便。Full 3D方式是高级方式，比中级方式需要更多的准备阶段，还有许多注意事项。可是3D实现后模拟整形时通过一次操作就可达到正面，侧面图像的自动转换。 EZ IMAGE MODE which doesn’t spend a period to make reparation and can be used directily for the primary period is easy to be used.Half 3D MODE which has several prepared periods is medium grade mode.The mode is used conveniently in the practical siumlative reshaping.Full 3D mode is high grade mode which need more prepared periods and a lot of precautions than the medium grade mode.While you can reach the automatic convertion between the front and the side image with one operation in the simulative reshaping after 3D. 没时间，忙的时候，主要使用EZ图像方式（MODE）就好。有充分的时间，使用Half 3D方式也可以。Full 3D方式是因高级方式要熟知操作方式，要充分的时间。患者第一次访问时只拍照，然后下次访问的时候给患者看Half 3D。 It is best to use EZ image mode when you are busy.It is also good to use Half 3D in sufficient time.As full 3D is high grade mode and need enough time the master the operated mode.In the first visit,the patients just for taking pictures and then in the next visit ,the patients can see the Half 3D. ?程序执行procedure implement 双击桌面上面的SyncroMax图符或者选择windows的开始按钮à程序（P）à韩秀3D整形系统à韩秀3D整形系统。过一段时间就会显示如下的初始画面。 Please click doubly the picture mark SyncroMax or the starting bartton in the windows →procedure→Korea Show 3D reshaping system→Korea Show 3D reshaping system .And after a period there will show the following primary picture. ? 韩秀3D整形系统初始画面Korea Show 3D reshaping primary picture 1. EZ图像Image MODE 1）打开open 选择菜单“映像（image）” à”