本科毕设-基于80C51的数据采集处理系统的设计与开发.docVIP

题目：基于80C51的数据采集处理系统设计 基于80C51的数据采集处理系统设计 摘　　要 数据采集是指从传感器和其他待测设备等模拟和数字被测单元中自动采集信息的过程。数据处理就是从采集到的原始数据中，删除干扰噪声、无关信息和不必要的信息，提取出反应被测对象特征的重要信息。数据采集处理系统是在信息科学领域中最为普遍的应用系统，它的存在有着非常重要的作用。 本文介绍的主要是基于80c51的数据采集处理系统的硬件设计和软件设计。硬件部分以单片机为核心，还包括A/D转换模块、显示模块和串行接口部分，实现对采集到的数据进行模拟量到数字量的转换，将转换后的数据送入单片机进行处理，将处理后的数据传入LED显示电路。最后该系统可根据上位机的控制信号将数据通过MAX232发送到上位机进行存储、处理。软件部分用C编写控制软件，对数据采集部分、数模转换部分、数据显示等程序进行了设计。 关键字：数据采集与处理；单片机；A/D转换器 General Date Collection and Processing System Based on 80C51 Signal-chip Microcomputer ABSTRACT 　　The data collection means from sensors and other measured analog and digital equipment tested process of automatic acquisition unit. Data processing is collected from the original data, remove the interference noise, irrelevant and unnecessary information, extract the important information response characteristics of the measured object. Data acquisition and processing system is in the field of Information Science in the most common application system.Data acquisition and processing system in the field of information science is the most common applications, its presence has a very important role. 　　This article describes the hardware design and software design of the data on which general data collection and processing system based on 80C51signal-chip microcomputer. The hardware of the system focuses on signal-chip microcomputer ,is also includes A/D conversion module ,display module,and the serial interface.The realization carries on the conversion that imitate to measure the numeral to measure towards the data that collect .the converted data into the microcomputer for processing, the processed data into the LED display circuit. Finally, the system is based on a control signal to the host computer sends data to the host computer through the MAX232 for storage and process.The software is partly programmed with C.The software can realize the function of monitoring and controlling the whole system.It designs much program like da