D型打结器驱动盘机构分析研究.pdfVIP

摘 要 打结器是牧草打捆机上一个重要的组成部件，驱动齿盘是打结器当中一个重要 的部件，它为整个打结器提供动力输出来源，它的质量的好坏直接影响整个打捆机 打结的效率，它有一个动力输入轴和三个动力传输线路，分别由齿轮啮合和凸轮带 动运动，整套机构运行速度快，齿轮运动轨迹精密，运动容易发生错位，传动部件 发生磨损，继而造成整套装置的损坏和工作失灵。 了解驱动齿盘的各个部位应力应变关系以及疲劳寿命，以便更好的指导生产者 对驱动齿盘的改进和生产，为改进和完善驱动齿盘的结构性能提供参考资料。 通过ANSYS 有限元结构分析软件对驱动齿盘进行应力应变和疲劳进行分析，分 析研究出应力集中部位和疲劳寿命。 关键词：打结器；驱动齿盘；应力分析；疲劳寿命；有限元分析 D Type Knotter Driving Gear Wheel Mechanism Analysis Abstract Knotter is grass bundling an important component of machine, a driving gear disk is knotter an important part, it provides the power output from the knotter, its quality directly influences the efficiency of bundling machine knot, it has a power input shaft and a three power transmission line, are driven by the gear and cam motion, the running speed of the whole mechanism, prone to dislocation motion trajectories, gear precision, once the gear dislocation, transmission parts will wear, resulting in damage and failure of the whole device. Master drive parts of fluted disc of relationship between stress and strain and fatigue, can better guide manufacturers to drive improvement and production of fluted disc. It plays an important part in research on tooth disk drive. Knotter whole knotting movement process is complex, interlocking engagement between the parts, each has certain rules, using ANSYS finite element analysis software for stress and strain and fatigue analysis, analysis of the stress concentration and fatigue life, provides the reference for the structural performance improvement and perfection of jaw s. Key Words: Knotter；Driving gear ；Stress analysis ；Fatigue life ；Finite element analysis Directed by: Prof. WANG Chunguang Applicant for Master degree: REN Dezhi （Agricultural Engineering) (College of Mechanical and Electrical Engineering. Inner Mongolia Agricultural University. Hohhot 010018. China)