钨冶炼工艺过程控制、仿真和在线监控系统研究.pdf

Abstract For a long time, the automation degree in most of the domestic tungsten smelting enterprises was on a low level. Detection with general instrument, off-line analysis, manual control and so on were still a major mode to produce and control the tungsten smelting, so the product quality was unstable, metal recovery was difficult to improve. In recent years, various factors increased world demands for tungsten and reduced high-quality mineral resources of tungsten substantially, so the sources of tungsten materials became extensive, and the composition of tungsten materials was changing, bringing about difficulties to accurately set the parameters. The production prone fluctuated and unstable, which affected product quality and resource utilization. Accordingly, the paper launched a research on automatic control and online monitoring technology of tungsten smelting process. In this paper, conducted the research and design of tungsten smelting process parameter measurement and online monitoring system with the EIC integration design idea. Gave emphasis to analysis and introduction about the grinding, alkaline-leach, crystalline and other major processes, control and monitoring system function analysis as well as system software and hardware, network structure and monitoring software design. The total tungsten smelting process control and on-line monitoring system consists with PLC control stations, supervision station and PROFIBUS. On this basis, this paper devoted to the reactor in the important tungsten smelting production processes——alkaline-leach carried out mechanism analysis, established a mechanistic mathematical model, and accordingly designed the corresponding fuzzy PID controller and MATLAB simulation analysis. Adopted