毕业设计（论文）_超细长外圆珩磨技术研究.docVIP

超细长外圆珩磨技术研究 摘要28~70mm，长度可达3000mm）的外圆表面进行珩磨精加工，使其精度等级（尺寸精度等级）和表面质量（表面粗糙度）达到一定要求。本次毕业设计的主要内容包括对车床CA6163×5000的总体改造设计，其中重点即是对车床CA6163刀架部分的改造设计，外圆珩磨头的改进设计，另外还有珩磨时润滑油路的系统设计，最后通过珩磨时力与扭矩的分析与计算以及外圆珩磨试验并数据处理来进行珩磨机床的性能校核与可行性分析。本次毕业设计遵循参照分析研究的方法，即通过分析内孔珩磨系统，其中包括如何将车床改造成为内孔珩磨机床以及内孔珩磨头的设计，内孔珩磨油路的系统设计等，以此为基础来进行外圆珩磨系统的研究与设计，重点即是对单锥面外圆珩磨头的进一步改进。本次毕业设计的成果包括由车床CA6163×5000改装而成的超细长外圆珩磨机床工作图（A0）A2），外圆珩磨头装配及其零件图（A2）关键词The Experimental Research on Superfine Cylindrical Honing Abstract: With the rapid development of science and technology, the production enterprises of processing efficiency and processing quality have become increasingly demanding. As an effective method, finishing honing can not only remove the larger allowance, but also improve the hole or cylindrical work piece size, shape accuracy and reduce the surface roughness, so it is a highly efficient machining method. In the honing of metal materials, particularly difficult to machine materials, how to improve the efficiency of its grinding is one of the main research of honing technology. The purpose of this graduation project is a long cylindrical ultra-fine honing system design, a long cylindrical piece of fine (diameter ofφ28~φ70mm, length up to 3000mm) of the cylindrical surface honing finishing, so that the accuracy level (dimensional accuracy level) and surface quality (surface roughness) meet certain requirements. The main graduation include lathe CA6163 × 5000 for the overall transformation of the design, which focuses on CA6163 lathe tool holder that is part of the transformation of the design, cylindrical honing head of improved design, in addition to honing the system when the lubricating oil design, the final time by honing analysis of force and torque calculation and experiment and data processing Cylindrical Honing machine for checking the performance and feasibility analysis. The graduation project follows the reference method of analysis, which bore honing system by the analysis, including how to be transformed