《AT11512 SAM L Brown Out Detector (BOD) Driver-Introduction》.pdfVIP

SMART ARM-based Microcontrollers AT11512: SAM L Brown Out Detector (BOD) Driver APPLICATION NOTE Introduction ® ® This driver for Atmel | SMART ARM -based microcontrollers provides an interface for the configuration and management of the devices Brown Out Detector (BOD) modules, to detect and respond to under-voltage events and take an appropriate action. The following peripheral is used by this module: • SUPC (Supply Controller) The following devices can use this module: • Atmel | SMART SAM L21/L22 The outline of this documentation is as follows: • Prerequisites • Module Overview • Special Considerations • Extra Information • Examples • API Overview Atmel-42453B-SAM-Brown-Out-Detector-BOD-Driver_AT11512_Application Note-12/2015 Table of Contents Introduction1 1. Software License 3 2. Prerequisites4 3. Module Overview5 4. Special Considerations6 5. Extra Information 7 6. Examples8 7. API Overview9 7.1. Structure Definitions 9 7.1.1. Struct bod12_config9 7.1.2. Struct bod33_config9 7.2. Function Definitions10 7.2.1. Configuration and Initialization10 7.3. Enumeration Definitions 14 7.3.1. Enum bod12_action14 7.3.2. Enum bod12_mode_in_active 14 7.3.3. Enum bod12_mode_in_standby 14 7.3.4. Enum bod12_prescale15 7.3.5. Enum bod33_action15 7.3.6. Enum bod33_mode_in_active 16 7.3.7. Enum bod33_mode_in_standby 16 7.3.8. Enum bod33_prescale16 7.3.9. Enum bod33_vol_monitor17 8. Extr