《AutoBenchtrade;1.1》.pdf

AutoBench™1.1 software benchmark data book w w w . e e m b c . o r g An Industry-Standard Benchmark Consortium Table of Contents Angle to Time Conversion 2 Basic Integer and Floating Point 4 Bit Manipulation 5 Cache “Buster” 6 CAN Remote Data Request 7 Fast Fourier Transform (FFT) 9 Finite Impulse Response (FIR) Filter 10 Inverse Fast Fourier Transform (iFFT) 12 Infinite Impulse Response (IIR) Filter 13 Matrix Arithmetic 15 Pointer Chasing 16 Pulse Width Modulation (PWM) 17 Road Speed Calculation 19 Table Lookup and Interpolation 21 Tooth to Spark 23 EEMBC AutoBench Data Book 1 An Industry-Standard Benchmark Consortium AutoBench™ Version 1.1 Benchmark Name: Angle to Time Conversion Benchmark This EEMBC benchmark simulates an embedded automotive application Description where the CPU reads a counter which measures the real-time delay between pulses sensed from a toothed wheel (gear) on the crankshaft of an engine. Then the CPU determines the Top Dead Center (TDC) position on the crankshaft, computes the engine speed, and provides a conversion from the tooth wheel pulses to precise crankshaft angle position. This value is expressed in linear time from TDC. The tooth wheel pulses actually represent crankshaft angle, and the delay between pulses yields angular velocity of the crankshaft (engine speed). The kernel starts each pass of the loop by re