《DC Brush Motor Drivers (36V max.)》.pdfVIP

Datasheet DC Brush Motor Drivers (36V max.) BD623xxx Series ●General Description ●Key Specifications These H-bridge drivers are full bridge drivers for brush ■ Supply Voltage Range: 36V(Max.) motor applications. Each IC can operate at a wide range ■ Maximum Output Current: 0.5A / 1.0A / 2.0A of power supply voltages (from 6V to 32V), with output ■ Output ON resistance: 1.5Ω / 1.5Ω / 1.0Ω currents of up to 2A. MOS transistors in the output stage ■ PWM Input frequency range: 20 to 100kHz allow PWM speed control. The integrated VREF voltage ■ Standby current: 0μA (Typ.) control function allows direct replacement of deprecated ■ Operating temperature range: -40 to 85℃ motor driver ICs. These highly efficient H-bridge driver ICs facilitate low-power consumption design. ●Packages (Typ.) (Typ.) (Max.) SOP8 5.00mm x 6.20mm x 1.71mm ●Features HSOP25 13.60mm x 7.80mm x 2.11mm Built-in, selectable one channel or two channels HSOP-M28 18.50mm x 9.90mm x 2.41mm configuration HRP7 9.395mm x 10.540mm x 2.005mm VREF voltage setting pin enables PWM duty control Cross-conduction prevention circuit Four protection circuits provided: OCP, OVP, TSD and UVLO ●Applications