《SIMID 1210-01》.pdfVIP

SMT Inductors, SIMID Series B82412-A SIMID 1210-01 Size 1210 EIA or 3225 IEC Rated inductance 0,010 to 10 H Rated current 90 to 700 mA Construction Ceramic or ferrite core Single-layer winding fixed by glue US-welded winding Without encapsulation Features Low height High Q factor High resonance frequency Suitable for reflow IR and vapor phase and wave soldering Applications Filtering of supply voltages, coupling, decoupling Antenna systems Automotive electronics Telecommunications Terminals Silver-plated 1–2 μm Cu, 4–6 μm Ag Base material CuSn6 Suitable for soldering and conductive adhesion No leaching during wave soldering Marking No marking on component Minimum data on reel: Manufacturer, part number, ordering code, L value and tolerance of L value, quantity, date of packing Delivery mode 8-mm blister tape, wound on 180-mm or 330-mm ? reel For details on taping, packing and packing units see page 153 87 04/00 SMT Inductors, SIMID Series B82412-A SIMID 1210-01 General technical data Rated inductance LR Measured with impedance analyzer HP 4194A at frequency fL Q factor Qmin Measured with impedance analyzer HP 4194A/HP 4291A at frequency fQ Rated current IR Maximum permissible dc with inductance decrease ?L/L0 ≤ 10 % and temperature increase of ≤ 20 K at rated temperature of 85 °C Self-resonance frequency fres, min Measured with network analyzer HP 8753 DC resistance Rmax Measured at 20°C ambient temperature, measuring current IR Climatic category In accordance with IEC 60068-1 55/125/56 – 55°C/+ 125°C/56 days damp heat test Solderability In accordance with IEC 60062-2-58 215 ± 3 °C, 3 ± 0,3 s Wetting of soldering area: ≥ 95 % Resistance to soldering heat In accordance with IEC 60068-2-20 260 °C, 10 s ?L/L ≤ ± 3 % Permissible PCB bending 2 mm 100 mm long standard PCB Weight Approx. 40 mg 88 04/00 SMT Inductors, SIMID Series B82412-A SIMID 1210-01 Dimensional drawing 0,25 min. 1 1 3 , 0 _ 8 8 , , 1 0 3 , 0 _ 6 , 1 0,6±0,