化学镀镍废液处实验研究.pdfVIP

Subject : The Study of Treatment Experiment of Electroless Nickel Plating Wastewater Specialty : Environmental Engineering Name : Zhang Jiangli （Signature） Instructor : Liu Zhuannian （Signature） ABSTRACT Electroless nickel plating wastewater, have lots of nickel ions, sodium phosphite, sodium hypophosphite, the pH buffer and stabilizer of organic matter. The nickel is not only a carcinogen, but also a shortage of expensive heavy metal resource. As we all know that phosphorus is a major pollution factor, which result in water eutrophication phenomena, because of there are large amount of reducing agent and stabilizer in the electroless nickel wastewater have high concentration of CODCr, therefore, electroless nickel plating wastewater treatment is quite complex. How to deal with the electroless nickel plating wastewater effectively and reduce environmental pollution and ecological destruction, which have great significance. In the paper, electroless nickel plating wastewater as the research object, mainly adopts chemical precipitation method, Fenton oxidation and chemical coagulation method to deal with nickel, phosphorus and CODCr. Chemical precipitation method to deal with the wastewater of nickel, using Na2S as the precipitating agent , through Na S dosage, reaction time, temperature and pH of four factors 2 on the removal rate of nickel in liquid waste. Studies have shown that: the pH was 6, and the temperature was 15 ℃, adding 30ml sodium sulfide solution(250g/L), one hour a