高层建筑结构地震响应问题ANSYS分析.pdfVIP

17　 1 　　　　　　　　 　Vol. 17 No. 1 　 2007 1　　 Journal ofHeilongjiang Institute of ScienceTechnology 　 　　 Jan. 2007 　　　　　　 :1671- 0118(2007)01- 00 4-0 ANSYS 靳翠军, 　刘卫群, 　杨小军 ( , 221008) 　:为深入探讨高层建筑的动力响应问题, 以 1 层高楼为例, 运用大型 限元分析软件 ANSYS,分析了高层建筑结构的动力特性,建立三维空间板梁结构 限元模型, 计算了结构的固 频率和固 振型。用时程分析的方法研究了常遇烈度、设防烈度和罕遇烈度地震载荷作用下顶层 的最大位移响应,三种烈度的最大位移分别为 6.080 6、21.010 3和 29.041 mm。结果表明:地震 烈度越大,结构的动力响应越大。三种烈度下的结构最大层向变位角均出现在第三层,说明第三层 为整个结构的薄弱层,为工程抗震设计提供了参考依据。 :ANSYS;高层建筑;地震波;动力响应;时程分析 　　:TU311. 2 :A App licatoi n of ANSYS in se ism ic response ana lys is of construct ing of h gi h bu idl ings J IN Cu ijun, 　LIU Weiqun, 　YAN G X iaojun (College of Science, China University ofM ining and Technology, Xuzhou 221008, Ch ina) Abstract:The dynam ic feature of high bu ildings is discussed in the present study w ith the applica- tion of ANSYS, the large finite element analysis sofwt are, ami ed at the analysis of dynamic response of h igh buildings. Based on the case of a 1-story-building, a model of beam and shell 3-D finite element structure is built and the frequency of structure and themode of vibration are computed in the study;fu-r thermore, the structural dynam ic response is discussed under d ifferent seism ic w avesw ith the use of the h istory analysismethod. The resu lts show that the more intense the seism icw ave is, the bigger is the dy- nam ic response of the buildings. The information can be used for the ant-i seism ic design of structure. Keywords:ANSYS;high bu ildings;seism icw ave;dynam ic response;h istory analysis 　　, ,, 1　结构动力模型和固有特性分析 。 1 , ANSYSAPDL,