1 000 kV特高压交流变电站铝管母线末端屏蔽方式研究.pdfVIP

38 卷 9 期 电 网 技 术 Vol. 38 No. 9 20 14 年9 月 Power System Technology Sep. 20 14 文章编号：1000-3673 （20 14）09-2562-08 中图分类号：TM 72 1 文献标志码：A 学科代码：470 4051 1 000 kV 特高压交流变电站铝管母线 末端屏蔽方式研究 李禾，王闯，刘鹏，彭宗仁 （电力设备电气绝缘国家重点实验室(西安交通大学) ，陕西省 西安市 710049 ） Study on Terminal Shielding Way of Aluminum Tubular Bus in 1 000 kV UHV AC Substations LI He, WANG Chuang, LIU Peng, PENG Zongren (State Key Laboratory of Electrical Insulation and Power Equipment(Xi ’an Jiaotong University), Xi ’an 7 10049, Shaanxi Province, China) ABSTRACT: As a result of its good current-carrying 末端的屏蔽方式问题日渐突出，研究其屏蔽结构对特高压交 performance and reliable mechanical connection property the 流电站的设计具有重要意义。针对1 000 kV 特高压交流长 tubular bus is widely used in HV substations. In UHVAC 治站在带电试运行过程中硬铝管母线高压并联电抗器侧末 substations the terminal shielding of the tubular bus becomes 端出现的电晕问题，使用有限元方法建立三维仿真模型，仿 more and more serious, so the research on the shielding 真计算了管母末端的电位和电场分布，找出了引起电晕放电 structure for tubular bus terminal is of significance to the 的原因，并在此基础上研究了几种屏蔽方式的效果和可行性， design of UHVAC substations. In allusion to the corona 提出了管母末端采用直径250 mm 的半球形封盖板结构和于 appeared at the terminal of aluminium tubular bus connected to 管母上方加装管径300 mm 的均压环相结合这一合理的屏蔽 the top end of the HV shunt reactor during the trial operation of 方式。该屏蔽方式明显改善了管母末端的电场分布，使管母 1 000 kV UHVAC Changzhi substation, a tri-dimensional 高压电抗器侧末端附近的场强最大值降低至 1 390 V/mm ， simulation model is built by finite element method and both 较原结构场强最大值降低了44.4% ，满足局部控制场强的要 distributions of potential and electric field at the terminal