圆弧剪刃滚切式钢板剪切机设计（全套含CAD图纸）.doc

买文档后送图纸，QQ 194535455 圆弧剪刃滚切式钢板剪切机设计 摘要 圆弧剪刃滚切式钢板剪切机是一种新式钢板剪切设备，它是中厚钢板精整工序中的重要设备，保证剪切机正常工作队提高板材生产线的产量有重要意义。随着我国中厚钢板年产量的不断增加，现在中厚板轧钢厂对钢板质量、品种、产量的要求也随之提高。圆弧剪刃滚切式钢板剪切机在整个剪切范围内刀片重叠量不变，剪切变形区小，被剪切板材不易弯曲变形，毛刺少，剪切质量高，并且，滚切式剪切机运动的上刀片与被剪板材之间只产生很小的相对运动，刀片磨损较小，特别适合于中厚板的切边、切定尺和纵向部分。本次设计的圆弧剪刃滚切式钢板剪切机用于定尺剪切最大厚度为40mm的钢板，要求剪切机结构合理、工作可靠、剪切质量高。此次设计内容主要是圆弧剪刃滚切式钢板剪切机的设计，设计内容主要包括剪切机总体方案设计、工作原理与基本机构等的确定、滚切剪主要参数的计算、电动机容量选择和减速器的设计、主要零件的设计与校核、润滑方式的选择以及图纸的绘制等。计算得其最大剪切力为8.5MN，剪切次数18次/分，上刀架最大行程162mm，电动机功率355kW，额定转速987r/min。机架采用闭式机架。 关键词：滚切剪；圆弧剪刃；剪切力  The Design of steel plate shearing machine with circular blade and scrolling shear mode Abstract The design of steel plate shearing machine with circular blade and scrolling shear mode is a new plate shearing machine, which is the important equipment of medium and heavy plate finishing processes, play an important part in ensuring shearing machines working normally to improve the output of sheet productions. With the increased annual output of medium and heavy plate, the requirements of quality, variety, output of medium and heavy plate rolling mill are much higher than before. The blade of hearing machine with roller blade cutting steel plate is with the same overlap quantity during the whole range of shearing, with small shearing deformation zone, not easy to deform for the sheared plates, with small burrs, high quality of shearing, besides, the blade and sheared plate move only a little on the roller blade cutting steel plate machine, also with small blade wear which is particularly suited to the edge of plate, shearing ruler and vertical parts. The designed shearing machine with roller blade cutting steel plate is used with fixed 40mm shearing plate length, which required the frame of machine to be reasonable, reliable and with high quality of shearing. The design of the main content is circular blade cutting plate shearing machine design, design content mainly includes shear machine overall design, working principle and basic institutions, ro