电力系统中谐波源的建模方法.pdfVIP

第 34 卷 第 8 期 电 网 技 术 Vol. 34 No. 8 2010 年 8 月 Power System Technology Aug. 2010 文章编号：1000-3673 （2010 ）08-0041-05 中图分类号：TM 76 文献标志码：A 学科代码：470·50 电力系统中谐波源的建模方法 郑连清，吴萍，李鹍 （输配电装备及系统安全与新技术国家重点实验室(重庆大学) ，重庆市 沙坪坝区 400044 ） Modeling Approaches of Harmonic Sources in Power System ZHENG Lian-qing, WU Ping, LI Kun (State Key Laboratory of Power Transmission Equipment System Security and New Technology (Chongqing University), Shapingba District, Chongqing 400044, China) ABSTRACT: Due to the widespread use of nonlinear loads in 装置在电力系统、工业、交通及家庭中的应用日 power system, the analysis on harmonics becomes 益广泛，谐波所造成的危害日趋严重。在对谐波的 indispensable, in which it is especially important to build 分析和治理过程中，谐波源模型的建立必不可少。 proper models to characterize harmonic sources. In this paper, 用于建立谐波源模型的基本方法主要有 3 种[1] ： based on related research results, existing models of harmonic sources are reviewed and the modeling approaches are 1）建立谐波源的运行参数和端电压之间的函数关 analyzed and compared. Considering good generalization 系式并进行傅里叶变换求解；2 ）对谐波源运行情 ability of support vector machine (SVM) in the modeling of 况建立分析模型并选择适当的迭代方法求解其电 nonlinear high dimensional data, a low-voltage uncontrolled 流波形；3 ）通过时域仿真求解谐波源的稳态电流 rectifier used in power electronic devices is used in the simulation by Matlab to obtain training data and it is modeled 波形。现有的谐波源模型主要有恒流源模型、基于 by least squares support vector machine (LS-SVM). Test results 交叉频率导纳矩阵的模型、Norton 等效模型、基 show that the output harmonic curren