基于偏#x003c0;_4直角坐标的DFT相角测量算法.pdfVIP

38 卷 9 期 电 网 技 术 Vol. 38 No. 9 20 14 年9 月 Power System Technology Sep. 20 14 文章编号：1000-3673 （20 14）09-2544-07 中图分类号：TM 72 1 文献标志码：A 学科代码：470 4051 基于偏p/4 直角坐标的DFT 相角测量算法 倪玉玲，郑建勇，梅军，朱超 （东南大学 电气工程学院，江苏省 南京市 2 10096 ） A Lean-p/4-Rectangular Coordinate Based Phase-Angle Measurement Algorithm Corrected by Discrete Fourier Transform NI Yuling, ZHENG Jianyong, MEI Jun, ZHU Chao (School of Electrical Engineering, Southeast University, Nanjing 2 10096, Jiangsu Province, China) ABSTRACT: In view of the insufficiency of traditional 关键词：相角测量；离散傅里叶变换；正序；偏p/4 直角坐 discrete Fourier transform (DFT) based phase angle 标系；相角误差 measurement algorithm in both accuracy and real-time DOI 10.13335/j.1000-3673.pst.2014.09.036 performance, the phase angle error of DFT based algorithm due to asynchronous sampling is analyzed and the functional 0 引言 relationship among phase angle error, which is composed of 相量测量单元(phasor measurement units，PMU) fixed phase angle error and dynamic phase angle error, 作为广域测量系统(wide-area measurement system， frequency deviation ratio and initial phase angle of sampling is [1-4] derived, and then a lean-π/4-rectangular coordinate based phase WAMS)的重要组成部分 ，主要实现 2 个方面功 angle measurement algorithm is proposed. Utilizing orthogonal 能：基于全球定位系统(global positioning system， property and quaternary phase equilibria of coordinate axis, the GPS)时间基准的同步采样和相量测量算法。 proposed algorithm cuts down the dynamic phase angle error as 目前相角测量算法应用最多的是离散傅里叶 much as possible. Comparing with traditional DFT based phase