《功率因数校正开关电源的研究与设计》外文翻译资料.docVIP

《功率因数校正开关电源的研究与设计》外文翻译 Switching Power Supply Design(开关电源设计) CHAPTER 3 Half- and Full-Bridge Converter Topologies 3.1 Introduction Half-bridge and full-bridge topologies stress their transistors to a voltage equal to the DC input voltage not to twice this value, as do the push-pull, single-ended, and interleaved forward converter to pologies. Thus the bridge topologies are used mainly in offline converters where supply voltage would be more than the switching transistors could safely tolerate. Bridge topologies are almost always used where the normal AC input voltage is 220 V or higher, and f