verity焊接结构疲劳评估教程(III)_王剑 201-294要点.ppt

Comparison of The Modified Gough Ellipse and Sonsino’s EESH Approaches (01) 改进的Gough椭圆方程与Sonsino EESH方法(2001)比较 Test Data (Sonsino et al, 01) 测试数据(Sonsino等，2001) ? Pure torsion 纯扭 ? Pure bending  纯弯 ? In-phase bending + torsion 弯扭同步 ? Out-phase bending + torsion 弯扭异步 Applications: The Structural Stress Based Multiaxial Fatigue Criterion 应用：基于结构应力法的多周疲劳设计规范 A material parameterμmay be introduced at suggestion of Prof. Radaj (05) 建议引入材料参数μ(Radaj, 2005) 2007 ASME Div 2: ASME Div2, 2007版 ? F(δ), if phase angle is known  相位角已知-F(δ) ? F(δ)min=1/sqrt(2) , if not known 相位角未知- F(δ)min=1/sqrt(2) ? ASME’s “relative effective stress” counting concept and be used for the time being 可暂时使用ASME的“相对有效应力”计数概念 A more effective “path-dependent maximum range” counting procedure has been developed in the SS JIP and will be first released to JIP participants 一个更有效的“路径相关的最大变化范围”计数程序正在开发中，不久将发布第一个版本。 Example: Battelle’s Path-Dependent Maximum Range Counting in σs -τs Plane 算例： σs–τs平面内路径相关最大变化范围计数法(Battelle) Interpretation of Low-Cycle Fatigue Data in Master S-N Curve Representation 主S-N曲线中低周疲劳数据的说明 ASME data focused upon low- cycle fatigue ASME中的低周疲劳数据 ? Presented either in strain vs life or pseudo-stress vs life 或者以应变-寿命形式出现，或者以伪应力-寿命形式出现 ? Pseudo-stress: 伪应力: – E*e – or, based linearly extrapolated elastic stiffness slope 或者，弹性刚度斜率的线性外推 Fatigue evaluation using elastic stress analysis in low-cycle regime 利用弹性应力分析进行低周疲劳评估 ? A pseudo structural stress definition is needed 需要定义伪结构应力 Structural Strain Definition 结构应变的定义 Nonlinea bending stresses 非线性弯曲应力 Linear Material Behavio 线性材料行为 (b) Non-Linear Material Behavio 非线性材料行为 Through-thickness structural stress and structural strain definitions: (a) linear material behavior; (b) nonlinear material behavior 厚度截面的结构应力与结构应变定义： (a) 线性材料行