电容换相换流器串联电容补偿度优化研究.pdfVIP

第39 卷 第5 期 电 网 技 术 Vol. 39 No. 5 2015 年5 月 Power System Technology May 2015 文章编号：1000-3673 （2015 ）05-1268-07 中图分类号：TM 721 文献标志码：A 学科代码：470·4051 电容换相换流器串联电容补偿度优化研究 1 1 2 1 刘晓霞 ，文俊 ，李亚男 ，韩民晓 （1．华北电力大学 电气与电子工程学院，北京市 昌平区 102206 ； 2．国网北京经济技术研究院，北京市 昌平区 102209 ） Optimization of Series Capacitor Compensation Degree of Capacitor Commutated Converter 1 1 2 1 LIU Xiaoxia , WEN Jun , LI Yanan , HAN Minxiao (1. School of Electrical and Electronic Engineering, North China Electric Power University, Changping District, Beijing 102206, China; 2. State Power Economic Research Institute, Changping District, Beijing 102209, China) ABSTRACT: In allusion to the problem that how to take the 电流、换相重叠角、触发角、视在熄弧角和实际熄弧角之间 value of the series capacitor in capacitor commutated converter 的关系，最终给出合适的串联电容补偿度的取值范围并进行 (CCC), a steady state model of CCC is established. Through 仿真验证。研究结果表明：补偿度的取值上、下限分别由阀 the Matlab software based mathematical analysis, the relation 峰值电压和实际熄弧角决定，其中阀峰值电压为主要限定因 of the series capacitor compensation degree with the voltage of 素；补偿度的可选范围涵盖欠补偿、全补偿和过补偿3 种状 series capacitor, valve voltage, the peak voltage of the valve, 态，且全补偿状态下CCC 系统不会发生串联谐振；得出强 the DC current, the commutation overlap angle, the 受端系统下补偿度的可选范围为[0.92, 1.4]，而弱受端系统 commutation overlap angle, the firing angle, the apparent 补偿度的可选范围为[0, 1.08]。 extinction angle and the actual extinction angle are revealed, 关键词：电容换相换流器；阀电压；补偿度；熄弧角；换相 and