不对称并联磁路磁心参数计算.pdfVIP

， EXPERTS FORUM ·专家论坛 不对称并联磁路磁心参数计算 刘九皋，石 炎 （南京精研磁性技术有限公司，江苏南京 210033） 摘 要：要： 几何形状和尺寸对称的EI、EE等配对磁心，国际电工委员会在IEC要： 60205标准“磁性零件有效参数计算”中， 推荐了一整套成熟的计算公式。但是，当EE、EI、ET等磁心中心柱偏离中心位置时，并联的两分支磁路便 不完全相同；而且当罐形、EP、RM型磁心穿过中心孔绕线测量时，其磁路则由两个以上不同的分支磁路并 联组成。采用IEC推荐的仅适用于等效单回路的公式无法计算此类非对称磁心参数。本文推荐了一套能解决 不对称并联磁路磁心参数计算的公式。文中计算了完全适用于IEC60205公式的对称磁心参数，同时又用本 文推荐的公式进行了计算，两种计算公式的结果基本相同。也就是说，作为通式，本文公式也适用于特例， 但它却轻松解决了不对称和多回路并联磁路磁心参数计算的难题。 关键词：磁心，并联磁路，磁路计算 Calculation of the Effective Parameters of Magnetic Piece Parts with Asymmetrical Parallel Magnetic Circuits LIU Jiu-gao, SHI Yan Abstract: The International Electrotechnical Commission (IEC) has provided a set of formulae in the standard IEC 60205 Ed.3: Calculation of the Effective Parameters of Magnetic Piece Parts (2006-01), by which everybody can reach the effective parameters of pair of magnetic cores with symmetrical shapes and sizes. However, the effective parameters of some special cores cant be figured out by the IEC 60205 formulae in the case that the center limb of asymmetrical core deviates from its centre location or its magnetic circuit is by two or more different branches of parallel magnetic circuit. In this article, another set of formulae are recommended, which can calculate the effective parameters of cores with asymmetrical parallel magnetic circuits. The effective parameters of symmetrical cores that can be figured out by the IEC 60205 formulae are also calculated by the new formulae we recommended and the two results are basically the same. In other words, as general expressions, the new formulae