《薄壳设计及成型技术》.pdf

薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin --wall Moldingwall Molding 可攜式電子產品的需求每年成長達30%，今後十年的 成長會更快。由於擁有這種產品的人還很少- 在美國 少於5%，全世界則少於1% - 整個市場大得驚人。 The demand for portable electronics has increased by 30% per year, with even faster projected growth in the coming one decade. The current relatively low penetration of these devices - less than 5% of the U.S.A., and 1% of the world’s population - implies the total market for portable electronic devices is tremendous. 薄殼技術薄殼技術 薄殼技術薄殼技術 Thin-Thin-wall Technologywall Technology ThinThin --wall Technologywall Technology 消費電子市場對於更小、更輕、更緊密的電腦、行動電話和其 他電子資訊裝置的需求成長快速，使得高功能的薄殼設計變得 必要 - 這一要求對於材料商、 產品和模具設計工程師、模具 廠、成型廠以及成型機暨附屬設備製造廠都是一大挑戰。 A rapid growth in demand in the consumer electronics market for smaller, lighter and tighter computers, cellular phones, and other electronic and communication devices necessitates high- performance housing designs with thinner wall sections - a critical requirement that is challenging material suppliers, part and mold designers, mold makers, and machine auxiliary equipment manufacturers alike. 薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin --wall Moldingwall Molding 薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin --wall Moldingwall Molding Tiny latch of dual-row connector 薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin --wall Moldingwall Molding 薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin --wall Moldingwall Molding CD-ROM tray from Philips 薄殼成型薄殼成型 薄殼成型薄殼成型 Thin-Thin-wall Moldingwall Molding ThinThin