基于ARM的嵌入式温度控制系统设计详解.docVIP

南 京 工 程 学 院 毕业设计说明书(论文) 作 者： 韩励 学 号： 240102416 系 部： 通信工程学院 专 业： 通信工程（计算机通信） 题 目：基于ARM的嵌入式温度控制系统的设计 指导者： 袁璟 副教授 评阅者： 2014 年 5 月 南 京 Design of Embedded Control System of Temperature Based on ARM A Dissertation Submitted to Nanjing Institute of Technology For the Academic Degree of Bachelor of Science By Li Han Supervised by Associate Professor Jing Yuan College of Communication Engineering Nanjing Institute of Technology March 2014  摘要 温度的测量和控制在工业生产中有广泛的应用，尤其在石油、化工、电力、冶金等工业领域中，对温度的测量和监控是非常重要的一个环节，温度参数是工业控制中的一项重要的指标。 本文主要研究了基于ARM7架构的嵌入式系统对于温度控制的应用，它基于ARM7 内核的 LPC2124, 以DS1820采集温度信号, 通过RWB 温度变送器和 A/D 转换获得实际温度值, 同时通过 LCD 实时显示; 此温度控制系统应用于热电仪, 实际应用表明, 系统稳定、可靠, 满足了热电仪的温度控制要求。 关键词：ARMProteus；嵌入式系统温度控制系统 Abstract Measurement and control of temperature is widely used in industrial production, especially in the petroleum, chemical, electric power, metallurgy and other industrial fields, measurement and monitoring of the temperature is a very important link, the temperature parameter is an important index in industrial control. This paper mainly studies the ARM7 based embedded system for the application of temperature control based on ARM7, which based on the LPC2124 kernel, the DS1820 collecting temperature signal, to obtain the actual temperature value through the RWB temperature transmitter and A/D conversion, at the same time through the LCD real time display; This paper introduces the principle, the system implementation process, gives some application circuits. This temperature control system used in the power system, the practical application shows that the system is stable and reliable, meet, the thermoelectric instrument t